Removing/Inserting Drives In The Computer Multibay; Removing A Drive From The Computer Multibay - HP Armada 7300 Reference Manual

Removing/Inserting Drives in
the Computer MultiBay

Removing a Drive from the Computer MultiBay

IMPORTANT:
read the cautions under "Caring for Removable Drives" earlier in
this chapter.
To remove a drive from the MultiBay:
1. In Windows 95, save your work and shut down the computer
to remove or insert a hard drive or a CD-ROM drive. Do not
remove or insert any drive when the computer is in
Hibernation.
In Windows NT, shut down the computer to remove or insert a
hard drive. You can remove or insert a diskette drive or a
CD-ROM drive when the computer is on, in Suspend, or off.
Do not remove or insert any drive when the computer is in
Hibernation.
2. Tilt the computer up
and the notch underneath the outside edge of the MultiBay.
3. Grasp the edge of the drive at the notch.
4. Slide the MultiBay release latch toward the back of the
computer
Removing a Drive from the Computer MultiBay
5. Place the drive into its carrying case, then insert another drive
or the MultiBay weight saver into the MultiBay.
6-14 Working with Removable Drives
Before handling a removable drive, be sure you have
and pull the drive out of the MultiBay
to locate the MultiBay release latch
.