Table of Contents
Advertisement
Do not place anything on top of the computer display.
Carry the computer in the slipcase, and avoid bumping the
computer against hard objects.
Replacing the Pointing Device Cap
If the rubber cap on the pointing device becomes soiled or worn,
you can replace it with one of the two spare rubber caps included
with the computer.
To replace the pointing device cap, follow these steps:
1. Exit all applications and shut down the computer.
2. Gently pull the rubber cap up from the keyboard. If the plastic
cap underneath also comes off, replace it before installing the
new rubber cap.
3. Gently push the new rubber cap onto the plastic cap.
Traveling and Shipping Guidelines
For safety and convenience, follow these steps when traveling
with or shipping the computer:
1. Back up all important hard drive files onto diskettes or tape
media. When traveling, take an extra backup copy with you.
NOTE:
electrical or magnetic impulses while stored or in transit.
2. Remove any PC Card, diskette, or CD that is in the computer.
3. Shut down the computer and turn off external devices.
4. Disconnect all external devices from the computer.
13-2 Maintenance and Travel Guidelines
CAUTION:
To prevent possible damage to the display, do not
place anything on top of the computer when it is closed. Do not
store any items on top of the computer when it is in the
slipcase.
CAUTION:
The slipcase is for carrying convenience. It does not
provide shock or vibration protection for the computer.
Be sure that diskettes or tapes are not exposed to
Hide quick links:
Advertisement
Table of Contents
