Dahua DH-XVR5416L-X User Manual page 142

Step 2 Configure the settings for IP address, subnet mask, default gateway, user name, and
password.
Step 3 Enable the Add function to add the device into the Added Device area.
Step 4 Click OK to save the settings.
 To modify IP address in batches, do the following:
Step 1 In the Searched Device list area, select the devices that you want to modify IP address
in batches.
Step 2 Click .
The Modify IP interface is displayed. See Figure 5-88.
Step 3 Enable the Batch Modify function.
Step 4 Configure the settings for start IP address (the IP address is allocated in sequence),
subnet mask, default gateway, user name, and password.
Step 5 Enable the Add function to add the devices into the Added Device area.
Step 6 Click Apply to save the settings.
Figure 5-87
Figure 5-88
Local Configurations 126