Dahua DH-XVR5416L-X User Manual page 184

To configure the settings for the video loss detection parameters, see "5.10.4.1
Step 2
Configuring Motion Detect Settings."
For PTZ activation, different from motion detection, the video loss detection can
activate PTZ preset, tour, and pattern.
Step 3 Click Apply to complete the settings.
Click Default to restore the default setting.

Click Copy, in the Copy dialog box, select the additional channel(s) that you want

to copy the motion detection settings to, and then click Apply.
5.10.4.3 Configuring Tampering Settings
When the camera lens is covered, or the video is displayed in a single color because of the
causes such as sunlight status, the monitoring cannot be continued normally. To avoid such
situations, you can configure the tampering alarm settings.
Step 1 Select Main Menu > ALARM > VIDIEO DETECT > Tampering.
The Tampering interface is displayed. See Figure 5-133.
Figure 5-132
Local Configurations 168