Define for all days of a week: Click All, all
Define the period by editing. Take Sunday as an example.
1)
Click
The Period interface is displayed. See Figure 5-131.
2)
Enter the time frame for the period, and then select the check box to enable the
settings.
There are six periods for you to set for each day.
Under Copy, select All to apply the settings to all the days of a week, or select
3)
Click OK to save the settings.
Step 3
On the Motion Detect interface, click Apply to complete the settings.
5.10.4.2 Configuring Video Loss Settings
When the video loss occurs, the system activates the alarm.
Step 1
Select Main Menu > ALARM > VIDIEO DETECT > Video Loss.
The Video Loss interface is displayed. See Figure 5-132.
timeline of any day, click the half-hour blocks to select the active periods, all
the days will take the same settings.
.
specific day(s) that you want to apply the settings to.
Figure 5-131
switches to
. On the
Local Configurations 167