Dahua DH-XVR5416L-X User Manual page 189

Parameter
Send Email
Buzzer
Log
Voice Prompts
Step 3 Click Apply to complete the settings.
5.10.5.2 Configuring Network Event Settings
Step 1 Select Main Menu > ALARM > ABNORMITY > Network.
The Network interface is displayed. See Figure 5-137.
Step 2 Configure the settings for the Network event. See Table 5-42.
Parameter
Event Type
Enable
Description
Select the Send Email check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > EMAIL.
Select the check box to activate a buzzer noise at the Device.
Select the check box to enable the Device to record a local alarm log.
Select to enable audio broadcast/voice prompts in response to a HDD
alarm event.
Table 5-41
Figure 5-137
Description
In the Event Type list, select Net Disconnection, IP Conflicted, or
MAC Conflicted as the event type.
Enable or disable the Network event detection function.
Local Configurations 173