2)
Select the record type and a weekday, and configure the period.
If the Motion check box and the Alarm check box are selected, the corresponding
alarm linkage should be enabled. For example, if the alarm type is Motion, select
Enable Channel, and select the recording channel.
Click OK to return to the Record interface.
3)
Click OK.
Click Copy to copy the settings to other channels.
3.8.2 Configuring Snapshot Schedule
You can configure the storage schedule for taking the snapshot.
Preparation
The snapshot function is enabled for the corresponding channel. For details, see "3.7 Configuring
Record."
Procedure
Click SETTING > STORAGE > SCHEDULE > Snapshot.
The Snapshot interface is displayed. See Figure 3-19.
Period
41