Dahua DH-XVR5416L-X User Manual page 140

Parameter
User Name
Password
Remote Channel
Decoder Buffer
Protocol Type
Encrypt
Step 3 Click Apply to save the settings.
 Only one device can be added manually at one time.

5.6.1.4 Modifying or Deleting Remote Devices
You can modify and delete the added devices.
To modify the remote devices, do the following:

Step 1 Click
The Edit interface is displayed. See Figure 5-86.
Description
your actual situation.
If you enter other value, for example, 70, and then you should enter
70 after the IP address when logging in the Device by browser.
Enter the user name of the remote device.
Enter the password of the user for the remote device.
Enter the remote channel number of the remote device that you want
to add.
In the Decoder Buffer list, select Default, Realtime, or Fluent.
If the remote device is added through private protocol, the default

type is TCP.
If the remote device is added through ONVIF protocol, the system

supports Auto, TCP, UDP, or MULTICAST.
 If the remote device is added through other manufacturers, the
system supports TCP and UDP.
If the remote device is added through ONVIF protocol, selecting the
Encrypt check box will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the
remote IP camera.
indicates successful connection and
or double-click a device.
Table 5-30
indicates connection failed.
Local Configurations 124