Dahua DH-XVR5416L-X User Manual page 119

5.4.4.2 Calling Tours
Step 1 On the Expanded PTZ Control Panel, in the No. box, enter the value of the tour that
you want to call.
Step 2 Click
Step 3 Click
5.4.4.3 Calling Patterns
Step 1 On the Expanded PTZ Control Panel, in the No. box, enter the value of the pattern that
you want to call.
Step 2 Call
The PTZ camera moves according to the configured pattern repeatedly.
Step 3 Click
5.4.4.4 Calling AutoScan
Step 1 On the Expanded PTZ Control Panel, in the No. box, enter the value of the border that
you want to call.
Step 2 Click
The PTZ camera performs scanning according to the configured borders.
Step 3 Click
5.4.4.5 Calling AutoPan
Step 1 On the Expanded PTZ Control Panel, click
Step 2 Click
5.4.4.6 Using AUX Button
On the Expanded PTZ Control Panel, click
Figure 5-64.
In the Direct Aux list, select the option that corresponds to the applied protocol.

In the Aux Num box, enter the number that corresponds to the AUX switch on the decoder.

to call the tour.
again to stop calling the tour.
to call the pattern.
again to stop calling the pattern.
.
again to stop auto scanning.
again to stop moving.
to start moving in horizontal direction.
, the AUX setting interface is displayed. See
Local Configurations 103