Dahua DH-XVR5416L-X User Manual page 91

Step 1 After you have configured the video recording settings, on the Record interface, click
Next.
The SNAPSHOT interface is displayed. See Figure 5-35.
Step 2 Configure the snapshot settings parameters. See Table 5-10.
Parameter Description
Channel In the Channel list, select a channel to take a snapshot.
Select the check box of the event type which includes General, MD,
Event type
Alarm, MD&Alarm, Intel, and POS.
Define a period during which the configured snapshot setting is active.
Period For details about defining a period, see "5.1.4.9 Configuring Recorded
Video Storage Schedule."
Copy Click Copy to copy the settings to other channels.
Step 3 Click Finished.
A pop-up message is displayed.
Step 4 Click OK.
The live view screen is displayed. The setting with startup wizard is completed. You can
start using the Device.
Step 5 (Optional) After the setting with startup wizard is completed, if the connected HDMI
display resolution is inconsistent with default resolution (1280*1024), a dialog box will
pop up. See Figure 5-36. Choose to switch the resolution or not.
Figure 5-35
Table 5-10
Local Configurations 75