Dahua DH-XVR5416L-X User Manual page 237

Parameter
Tour
Voice Prompts
More Setting
Step 4 Click Save to save the settings.
5.12.2.4.2 Configuring Alarm Settings for Humidity Data
You can configure the alarm event by setting the humidity data.
Step 1 On the main interface, select IoT > MANAGER > Temperature/Humidity.
The Temperature/Humidity interface is displayed. See Figure 5-187.
Description
Select the check box to enable a tour of the selected channels.
To use this function, make sure the tour is enabled and configured
in Main Menu > DISPLAY > TOUR.
Select to enable audio broadcast/voice prompts in response to a
temperature alarm event.
Show Message: Select the Show Message check box to

enable a pop-up message in your local host PC.
 Buzzer: Select the check box to activate a buzzer noise at the
Device.
 Video Matrix: Select the check box to enable the function.
When an alarm event occurs, the video output port outputs the
settings configured in "Main Menu > DISPLAY > TOUR."
Not all models support this function.
Send Email: Enable the system to send an email notification

when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main Menu > NETWORK > EMAIL.
 Log: Select the check box to enable the Device to record a
local alarm log.
 Select the check box to enable the function. When an alarm
event occurs, the extra screen outputs the settings configured
in Main Menu > DISPLAY > TOUR > Extra Screen.
Not all models support this function.

To use this function, extra screen shall be enabled.

Table 5-53
Local Configurations 221