Ir Remote Control - Cary Audio Design DMS-800 Owner's Manual

IR REMOTE CONTROL

This section explains how to use the remote control to set up and operate the DMS-800PV.
1. POWER
Use it to turn the power on and off.
2. ALPHANUMERIC KEYS
Use for searching music library and entering network
settings, such as Wi-Fi security key, etc.
3. ADD/DELETE
Press add or delete on music selections to create or
edit a song queue or playlist.
4. HOME
Press to return to the home screen of the source.
5. PLAY MODE
Press to switch between Play, Shuffle, Repeat, and
Repeat All.
6. NAVIGATION/PLAY HUB
Use the corresponding keys to navigate up, down,
right, left, and Enter for menus/lists and to Play, Skip,
Search, and Pause during music playback.
7. DISPLAY
Use to select the player displays various brightness
levels or turn the display off.
8. INPUT SOURCE SELECTOR
Use to select the desired input source.
9. VOLUME -/+
Decrease or increase volume.
10. MUTE
Use it to mute the sound. Press again to resume the
sound.
11. QUEUE
Press to display the song queue for playback of a
queue or to save a queue as a playlist.
12. MENU
Press to go to the Setting Menu of the DMS-800PV. For
DMS-800PV only, Press and hold for 5 seconds to
change the IR code set.
13. NOW PLAYING
Press to jump to the now playing screen of the current
source.
14. SRC
(Sample Rate Converter). Press to select one of the many PCM & DSD TruBit™ upsample rates. This can also
convert any playing PCM signal to a DSD (Direct Stream Digital) signal. This function does not work with MQA files
as they are fixed at 16x or 705.6 kHz.
15. BT OUT
Press to send the audio from the DMS-800PV to Bluetooth headphones or Bluetooth speakers.
19