Panasonic KX-TDE110 Installation Manual page 36

1.4 Specifications
Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the
version, follow the procedure below:
While starting up
PROGRAM
SP-PHONE
Power Supply Unit Selection
The PBX needs a power supply unit (PSU) suitable for its configuration. Calculate the load figure from the
type and number of items of equipment to be connected, and determine the type of PSU that will be
required.
Load Figure Calculation
PT
*1
Extension Card
CS (1 unit)
PT-interface CS (1 unit)
VPS (1 port)
*1
Only the extension cards that can support SLTs count for the load figures.
36 Installation Manual
SP-PHONE
Select
"Maintenance".
Software version
is displayed.
Equipment Type
KX-T7600 series DPT/KX-T7600 series DSS
console
Other DPT/Other DSS console
APT
IP-PT
SIP Extension
DHLC8
SLC8
SLC16
MSLC16
SP-PHONE
Select
"Version display".
To exit the programming mode
HOLD HOLD
"AP Version".
HOLD HOLD
Load Figure
1
4
4
0
0
8
8
16
16
4
4
1