The Phone's Web Interface - Snom D385 User Manual

D385 User Manual

The phone's web interface

When the web interface is opened for the first time upon initialization, you will see the Security page.
We urge you to set administrator and HTTP passwords to protect your phone. The default
administrator password is 0000 (4 zeros); there is no default HTTP password. Please note:
-
Administrator password. If you do not replace the default administrator password by
an individual one, an unauthorized third party with access to the phone could set an
administrator password unknown to you. In such a case, you would no longer be able to
switch from user mode to administrator mode.
-
HTTP user name and password. If you do not set these, you make it easier for experienced
hackers to break into your system.
Note: Be sure to write down your admin password and your HTTP user name
and password and store them in a secure place.
Without the administrator password, you will not be able to return the phone and
the web interface from user mode to administrator mode; many settings will
be inaccessible. Without HTTP user name and password you cannot open the
phone's web interface.
You can set and change the data on the phone's web interface at any time.
1. Click Advanced Settings in the vertical menu on the left side.
2. Click the QoS Security tab at the top of the Advanced Settings page.
3. Enter the data in the text fields and click Apply.
◦
Administrator password. Valid values are arbitrary character strings of numerals, letters,
and/or special characters of any length. Keep in mind that you may have to enter these
37
Getting to Know Your Phone