It Is Time To Replace The Ink Cartridges; Ink Cartridge Handling Precautions - Epson WorkForce WF-7830 Series User Manual

Solving Problems
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
"List of Paper Type" on page 31

It is Time to Replace the Ink Cartridges

Ink Cartridge Handling Precautions

Read the following instructions before replacing ink cartridges.
Storing precautions for ink
❏ Keep the ink cartridges out of direct sunlight.
❏ Do not store the ink cartridges in high or freezing temperatures.
❏ For best results, Epson recommends using up ink cartridges before the best before date printed on the package,
or within six months of opening the package, whichever is earlier.
❏ For best results, store ink cartridge packages with their bottom down.
❏ After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
❏ Do not open the ink cartridge package until you are ready to install it in the printer. The cartridge is vacuum
packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal
printing may not be possible.
Handling precautions for replacing ink cartridges
❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package.
❏ Do not shake cartridges after opening the package, as they may leak.
❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or
you may not be able to print. Do not remove or tear the label on the cartridge; this can cause leakage.
>

It is Time to Replace the Ink Cartridges

>
Ink Cartridge Handling Precautions
197