Epson WorkForce WF-7830 Series User Manual page 139

Maintaining the Printer
10. Pack the printer in its box, using the protective materials.
Caution:
!
❏ When carrying the printer, lift it using a stable position. Lifting the printer using an unstable position may result
in injury.
❏ Because this printer is heavy, it should always be carried by two or more people when unpacking and
transporting.
❏ When lifting the printer, place your hands in the positions shown below. If you lift the printer holding other
positions, the printer may fall or you may trap your fingers when placing the printer.
❏ When carrying the printer, do not tilt it more than 10 degrees; otherwise the printer may fall.
Important:
c
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the
printer from printing.
When you use the printer again, make sure you remove the tape securing the ink cartridge holder. If print quality
has declined the next time you print, clean and align the print head.
Related Information
"Checking and Cleaning the Print Head" on page 124
&
"Aligning the Print Head" on page 126
&
>
Transporting and Storing the Printer
139