Epson WorkForce WF-7830 Series User Manual page 281

Product Information
Report Format:
Selects a format for fax reports in Fax > More tab > Fax Report other than Protocol Trace. Select
Detail to print with error codes.
Security Settings
You can find the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Security Settings
Note:
On the Web Config screen, you can find the menu below.
Fax tab > Security Settings
Direct Dialing Restrictions:
Selecting On disables manual entry of the recipient's fax numbers allowing the operator to select
recipients only from the contacts list or sent history.
Selecting Enter Twice requires the operator to enter the fax number again when the number was
manually entered.
Selecting Off enables manual entry of the recipient's fax numbers.
Broadcasting Restrictions:
Selecting On allows only one fax number to be entered as the Recipient.
Confirm Address List:
Selecting On displays a recipient confirmation screen before starting the transmission.
You can select the recipients from All or Only for Broadcasting.
Backup Data Auto Clear:
Backup copies of sent and received documents are usually temporarily stored in its memory to
prepare for an unexpected power off due to an electricity failure or an incorrect operation.
Selecting On automatically erases the backups when sending or receiving a document completes
successfully and the backups become unnecessary.
Clear Backup Data:
Erases all backup copies temporarily stored in the printer's memory. Run this before you give the
printer to someone else or dispose of it.
This menu is not displayed on the Web Config screen.
Scan Settings
Confirm Recipient
Check destination before scanning.
Email Server
Set the email server settings for scanning Email.
> >
Settings Menu List General Settings
281