Epson WorkForce WF-7830 Series User Manual page 355

Administrator Information
Protocol
IPP Settings
SNMPv1/v2c Settings
SNMPv3 Settings
Related Information
"Controlling protocols" on page 354
&
"Protocol Setting Items" on page 355
&
Protocol Setting Items
Bonjour Settings
Items
Use Bonjour
Bonjour Name
Bonjour Service Name
Location
Top Priority Protocol
SLP Settings
Items
Enable SLP
WSD Settings
Items
Enable WSD
Printing Timeout (sec)
Scanning Timeout (sec)
Device Name
Location
>
Advanced Security Settings
Description
You can specify whether or not to allow printing from IPP. When this is enabled, you can print
over the Internet.
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
>
Controlling Using Protocols
Setting value and Description
Select this to search for or use devices through Bonjour.
Displays the Bonjour name.
Displays the Bonjour service name.
Displays the Bonjour location name.
Select the top priority protocol for Bonjour print.
Setting value and Description
Select this to enable the SLP function.
This is used such as network searching in EpsonNet Config.
Setting value and Description
Select this to enable adding devices using WSD, and print
and scan from the WSD port.
Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.
Enter the communication timeout value for WSD scanning
between 3 to 3,600 seconds.
Displays the WSD device name.
Displays the WSD location name.
355