Emerson Rosemount 3812 Maintenance And Troubleshooting Manual page 76

Meter maintenance
April 2022
32. Repeat
33. Plug the Acquisition cable terminal block into J3 on the Acquisition board and
34. When you have completed wiring the transducer cables to the Acquisition Module,
76
Figure 3-40: Transducer terminal block wiring
Step 30 and Step 31
tighten the terminal block screws with a 1/8 inch (3mm) flat blade screw driver.
Figure 3-41: Transducer wiring and Acquisition cable reassembled
A. Transducer wiring terminal blocks
B. Acquisition cable
C. Acquisition Module
D. Base enclosure O-ring
E. Base Enclosure
check the Base Enclosure O-ring and reinstall it if necessary.
Maintenance and Troubleshooting Manual
for each transducer you are replacing.
00809-0100-3812
Emerson.com/Rosemount