Emerson Rosemount 3812 Maintenance And Troubleshooting Manual page 66

Meter maintenance
April 2022
8. Using a 1/4 inch (7mm) flat blade screw driver loosen and remove the three
9. Remove the three Base Enclosure hex head bolts, shoulder washers, flat washers
66
Figure 3-26: Acquisition Module cable and transducer wiring
A. Acquisition cable and terminal block
B. Transducer wiring and terminal blocks
C. Acquisition Module
D. Base Enclosure
E. Upper split shroud
Acquisition Module flat head screws, split lock washers, and flat washers then
remove the Acquisition Module from the Base Enclosure.
and split lock washers with a 7/16 inch (11 mm) socket wrench. Then remove the
Base Enclosure from the meter body.
Maintenance and Troubleshooting Manual
Emerson.com/Rosemount
00809-0100-3812