Table of Contents
Advertisement
Meter maintenance
April 2022
Figure 3-84: Latched band shroud assembly
A. Band shroud
B. Stainless steel strike
C. Transducer cable
D. Meter body recess for pop rivet allowance
E. Meter body shoulder
F. Shroud latch
Procedure
1. Install the security seal wire into and through the holes in one of the shroud latches
124
(maximum wire diameter .078 inch; 2.0 mm).
Maintenance and Troubleshooting Manual
Emerson.com/Rosemount
00809-0100-3812
Advertisement
Table of Contents
Troubleshooting
