Table of Contents
Advertisement
NETWORK
4.5
The DVR can be connected to network or internet through either fixed IP or dynamic IP by proper setting of
DVR and router.
4.5.1. NETWORK
NETWORK TYPE
Select either STATIC IP or DHCP for dynamic IP.
If DHCP is selected, the DVR will automatically configure the network settings according to the current
network requirements. If DHCP is selected, click the "IP DETECT" button to automatically detect the
updated IP address information.
If STATIC IP is selected, manually enter all necessary network settings. For proper configuration, it is
recommended to assign the DVR a DHCP address and let it auto discover all the proper network settings,
and then change the Network Type back to STATIC IP and save the changes.
IP ADDRESS
Displays the DVR's IP address. If DHCP is selected, the IP address will automatically adjust to match the
network's requriements. If STATIC IP is selected, users can input IP address by clicking
SUBNET MASK
Subnet Mask address classifies the subnet that the system belongs to. For more information, please
consult your network administrator or your internet provider.
GATEWAY
This is the IP address of the network router or gateway server. It is required when connecting to the DVR
through an external router from another network. For more information, please consult your network
administrator or your internet provider
DNS SERVER
Enter the IP address of the Domain Name Server. You should input the DNS Server information in order to
use DDNS, E-mail notifications and NTP Server. For more information, please consult your network
administrator or your internet provider.
TCP/IP PORT
Input the port number to use when connecting to the DVR locally or remotely. The default is set to 9010. If
your ISP blocks the port #9010, you need to input another valid port number (ex. 9020).
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
button.
Advertisement
Table of Contents
