Dst Setting And Image Playback - Digital Watchdog VMAX AND CORE DW-VACB2T Manual

DST Setting and Image Playback

3.7
nd
DST (Daylight Saving Time) begins at 2:00 AM local time on the 2 Sunday of March and ends at 2:00 PM
DST on the first Sunday of November.
During DST, the DVR's time clock has to be adjusted according to the regional time zone.
3.7.1. DST Setting
To enable DST setting on the DVR, go to the menu of SYSTEM > INFORMATION and click "DATE/TIME "
to open thw window shown below. Simply check the "USE DST" box to apply the DST time change. (Select
the proper Time Zone that allows the DST setting to be activated.)
3.7.2. DST Image Playback
When there is an hour overlapped data due to DST, the overlapping hour will be indicated in Blue in the
Intelli-Search Bar during playback.
To playback data from the overlapped hour, select a time in the intelli-search bar. A "Data Selection" message
will appear. Select whether to play DST data or Non-DST data.
Click [OK] to play DST image Click [CANCEL] to play Non-DST image.
["DST" image is displayed] ["Non-DST" image is displayed]
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com