Table of Contents
Advertisement
DATE/TIME
Manually adjust the date and time, select the display mode for the time and date, and select the appropriate
time zone. If applicable, check the "USE DST" box.
There are three types of time sync mode.
Server Mode
The operating DVR is set as a Time Sync Server, which can synchronize the time clock of other DVR(s)
connected over the same network.
Client Mode
The operating DVR is set as one of the client DVR(s). Input the IP address of designated DVR as a
Time Sync Server in "SYNC SERVER". Then, the DVR's time clock will be synchronized with server by
interval time set in "TIME SYNC CYCLE".
NTP Mode
"pool.ntp.org" is the recommended NTP Server. To activate, set the TIME ZONE of your local area and
then click [SYNC NOW].
For DST setting, please refer to "3.7 DST Time Setting.
Note
The "HELP" button can help you understand how to setup several important settings.
LANGUAGE
Select the display language from the available options. If you cannot find your preferred language, please
contact your dealer.
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
Advertisement
Table of Contents
