Table of Contents
Advertisement
④ The system will automatically check the FTP server for a newer firmware everyday at
user-specified hour and will alert the user if a newer version is found.
⑤ Click [START] button to proceed automatic firmware upgrade. After completed, the
system will reboot.
VIDEO SIGNAL
Check the right video signal (NTSC or PAL). This setting should be matched the [NTSC/PAL] Selection
Switch located on the rear panel. Video images might heavily shake and blink if NTSC/PAL is not properly
set.
IP ADDRESS
Shows the DVR's IP Address. It can be set at 'MENU>NETWORK>NETWORK'.
MAC ADDRESS
Shows the unique identity number for the DVR.
KEY PAD BEEP
User can turn on or turn off the beeping sound of key pad.
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
Advertisement
Table of Contents
