Advertisement
3.
Enter the supervisor pin code "00000". Select "OK" to continue.
|
Note: This pin code only applies when the PSD (meter) is not present.
You will now be able to access the "LAN settings" via the "communication
settings" option number "9"
|
Note: Please ask a member of your IT administration staff to be
present before adjusting these settings.
If you are using a proxy server, the proxy settings can also be accessed from this
menu. However the mailing system will automatically detect the proxy server
during the installation wizard and request the following information.
8
»
Advertisement
Need help?
Do you have a question about the IS Series and is the answer not in the manual?