quadient IS Series Installation Manual page 11

IP Configuration report
A report can be obtained to assist your IT department when configuring your
network firewall to allow traffic from the mailing system.
To access the report please follow steps 1-3 in page 7 and 8 of this booklet
"Manually configuring LAN communication settings" this will allow you
access to the "supervisor menu".
4. Select "Reports" from the menu.
5. Select "IP Configuration report"
6. Make sure that labels are present in the label feeder. Select "Get report"
|
Note: IS350 uses double labels which can be fed the same way as an
envelope.
The label will be printed showing the current network settings assigned to
the mailing system.
10
Select report
7 Multi account
8 Base errors
9 Meter errors
10 IP Configuration report
11 Proxy configuration report