SECTION 7: MAINTENANCE
!
Disconnect power to the
machine when perform-
ing any maintenance,
assembly
ments. Failure to do this
may result in serious
personal injury.
Lubrication
Shielded and pre-lubricated ball bearings require
no lubrication for the life of the bearings. All bear-
ings are standard sizes, and replacements can
be purchased from our parts department or a
bearing supply store.
G1061/G1061Z Buffing System
or
adjust-
Miscellaneous
Always be aware of the condition of your buffer.
Routinely check the condition of the following
items and repair or replace as necessary:
•
Loose mounting bolts
•
Worn switch
•
Worn or damaged cord
•
Worn or damaged support bearings or guide
bearings
-11-