Operation - Prince Castle DHB2PT-33DQ Series Operation Manual

1
Turn power On/Off switch to ON position.
Load pan covers (if used) onto pan racks and
insert racks into the unit.
MENU
TRANSFER BKFT
ENTER REG
3
LED Timing Status
EGGS
EGGS
LED Timers
(steady) =
RED RED
(flashing) =
RED RED
(steady) =
GREEN GREEN
(flashing) =
GREEN GREEN
(steady) =
YELLOW
(flashing) =
YELLOW
5
When any of the timer LED's flash, cook more product or
remove and discard product as indicated.
GREEN GREEN Flashing
Cook more product
YELLOW YELLOW Flashing
Cook more product
RED RED Flashing
Discard product
WARNING
Hot surfaces.
541-553revC_EN

Operation

Allow 30 minutes for
heaters to reach operating
temperature. The
Temperature Display will
show temperature as unit
warms up to the operating
temperature.
Power On/Off Switch
MENU
BKFT
REG
ENTER
Ready for product
Discard product
Oldest product, use first
Cook more product
Newer product, use green first
Cook more product
MENU
TRANSFER BKFT
REG
ENTER
2
Press all PAN Buttons
EGGS
The PAN DISPLAYS will show the
assigned product name.
If no product is assigned, the display
will be dim and show "----". Pressing
the PAN button will not activate the
timer if "----" is displayed. Pressing
PAN button when product name is
displayed will start timing cycle.
When LED is steady
4
RED, load product
and press the PAN
Button.
TRANSFER
If only one pan is active for a
product, the LED will turn from
RED to GREEN.
Product, along with any remaining time, can be
6
transferred from one cavity to another as follows:
A. Press and release the TRANSFER
Button. Displays for available bins
are brightly lit. Displays for bins
currently timing, are dimly lit.
SAUS SAUS
BACN
B. Press and release the PAN
button of the product to be
moved.
NOTE: If product transfer is not completed within a pre-programmed
transfer time, the transfer will be cancelled. See your Manager.
3
Product Holding Bin
DHB2PT-33DQ Series
MENU
EGGS
ENTER
BKFT (Breakfast) or
REG (Regular Menu)
will be lit depending on
pre-programmed menu.
If no other pan is active for a
product, the LED for the first
pan loaded will turn from RED
to GREEN.
The LED for the 2nd pan (3rd
pan, etc.) loaded will turn from
RED to YELLOW.
MENU
BKFT
ENTER REG
An LED timer can be stopped
(cancelled) at any time by
pressing and releasing the
corresponding PAN Button.
C. Press and release the
TRANSFER button again.
TRANSFER
SAUS
BACN
D. Move the product. Press and release
the PAN Button for the new location.
The new location will finish timing
the product. When the transferred
pan timing expires, location will
revert to original menu setting.
Printed in USA 10/10 © 2010
BKFT
REG
B