Performing A System Test - Honeywell Home Lyric T6 Pro Wi-Fi Professional Install Manual

Performing a system test
You can test the system setup in ADVANCED
MENU under SYSTEM TEST option.
1 Press and hold Menu on the Lyric
thermostat for 5 seconds to access
ADVANCED MENU options.
2 Touch < or > to go to SYSTEM TEST.
3 Touch Select or touch text area.
4 Touch (< ; or > to select system test type.
Touch Select or touch text area.
5 For the heat test and cool test, use +; or -
to activate each stage of the equipment.
For the fan test, use < or > to turn the fan
on and off.
NOTE: The clock is used as a timer while the
stages are running. The Heat On and Cool On
indicators are displayed when the system test
is running.
QVr,Tj-r,,i TTC
3iJiLm iLji
o o
Viewing equipment status
You can see the status of thermostat-
controlled equipment in the Menu under the
EQMT STATUS option.
1 Touch Menu on your thermostat.
2 Touch T ; or > to go to EQMT STATUS.
Touch Select or touch text area.
3 Touch C< I or ( >) to view statuses of all the
equipment the thermostat is controlling.
Depending on what feature the thermostat
supports or how it was installed, the
Equipment Status screen reports data for
the following systems:
• Heating and cooling
• Fan
• Ventilation (available on certain
models only)
rnr,/iTfriTITi ir
HERT RIRGE
17