Table of Contents
Advertisement
• Wake-On-PS/2
This function allows you to use the PS/2 keyboard or PS/2 mouse to power-on the system.
Important:
The 5V_standby power source of your power supply must support ≥720mA.
• Power Failure Recovery
When power returns after an AC power failure, you may choose to either power-on the system
manually or let the system power-on automatically.
• USB
The system board supports the new USB 3.1 Gen1. It is capable of running at a maximum
transmission speed of up to 5 Gbit/s (625 MB/s) and is faster than USB 2.0 (480 Mbit/s, or
60 MB/s) and USB 1.1 (12Mb/s). USB 3.1 Gen1 reduces the time required for data transmis-
sion, reduces power consumption, and is backward compatible with USB 2.0. It is a marked
improvement in device transfer speeds between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
Chapter 1 Introduction
Chapter 1
8
www.dfi.com
Advertisement
Table of Contents
