Clear Cmos; Ps/2 Power Select - DFI KD632-Q170 User Manual

Clear CMOS

If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP9 pins 2 and 3 to On. Wait for a few seconds and set JP9 back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Chapter 2 Hardware Installation
Chapter 2
1 2 3
1-2 On:
Normal (default)
JP9
1 2 3
2-3 On:
Clear CMOS

PS/2 Power Select

3 3
2
2
1
1
2-3 On:
1-2 On:
+5VDU (default) +5V
JP32
JP32 is designed to select the PS/2 power: +5VDU (default) or +5V.
17
www.dfi.com