Rj45 Lan Ports; Audio - DFI KD632-Q170 User Manual

RJ45 LAN Ports

LAN 1 LAN 2
LAN 1
LAN 2
Features
• Intel I211AT PCI Express Gigabit Ethernet controller
®
• Intel I219LM Gigabit Ethernet Phy with iAMT11.0 (10/100/1000Mbps) (only Xeon and
®
Core i7/i5 support iAMT)
The LAN port allows the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu ("ACPI Configuration" submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2

Audio

19
Battery
1
1
Rear Audio
The system board is equipped with 2 audio jacks (Line-out and Mic-in). Line-in jack is available
upon request. A jack is a one-hole connecting interface for inserting a plug.
•
•
•
Front Audio
The front audio connector allows you to connect to the second line-out and mic-in jacks that
are at the front panel of your system.
BIOS Setting
Configure these Audio devices in the Advanced menu ("Audio Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the audio driver. Refer to the chapter 4 for more information.
24
Line-out
Mic-in
Rear Audio
Front Audio
2 10
1 9
Line-in Jack (Light Blue) (optional)
This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player,
AM/FM radio tuner, synthesizer, etc.
Line-out Jack (Lime)
This jack is used to connect a headphone or external speakers.
Mic-in Jack (Pink)
This jack is used to connect an external microphone.
19
Battery 1
1
www.dfi.com