DFI KD632-Q170 User Manual page 38

USB Configuration
This section is used to configure the parameters of the USB device.
InsydeH2O Setup Utility
Advanced
Legacy USB Support <Enabled>
XHCI Hand-off <Disabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Legacy USB Support
Disabled
Disable USB keyboard/mouse/storage support under UEFI and DOS environment.
Enabled
Enable USB keyboard/mouse/storage support under UEFI and DOS environment.
UEFI Only
Enable USB keyboard/mouse/storage support under UEFI environment.
XHCI Hand-off
Enable or disable to clear XHCI controller ownership change SMI bit by BIOS.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
USB keyboard/mouse/stor-
age support under UEFI
and DOS environment. It
will supporting UEFI en-
vironment only if set to
UEFI Only
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

PCI Express Configuration
This section configures settings relevant to PCI Express root ports.
Advanced
PCIE 1

PCIE 2

PCIE 3

PCIE 4

PCIE 5

M.2

Mini PCIE

Intel I211

Intel I219

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Advanced
PCIE 1
PCIe Speed
Hot Plug
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
PCIE 1 to PCIE 5, M.2 and Mini PCIE
This field is used to enable or disable the PCI Express Root Port.
PCIe Speed
Select the speed of the PCI Express Root Port: Auto, Gen1, Gen2 or Gen3.
Hot Plug
This field is used to enable or disable the PCI Express Hot Plug.
38
InsydeH2O Setup Utility Rev. 5.0
PEG PCI Express Port set-
ting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH2O Setup Utility Rev. 5.0
Enable or Disable the Root
<Enabled>
Port
<AUTO>
<Disabled>
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com