DFI KD632-Q170 User Manual page 66

4. In the Exit menu, select Exit Saving Changes then select Yes and press Enter.
InsydeH2O Setup Utility
Main Advanced Security Boot
Exit Saving Changes
Load Optimal Defaults
Discard Changes
Save Setting to file
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Chapter 6 Intel AMT Settings
Rev. 5.0
Exit
Exit system setup and save
your changes.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 6
Enable Intel AMT in the Intel
®
Extension (MEBX) Screen
1. After the system reboots, press <Del> to enter the main menu of the Insyde BIOS.
2. In the Advanced menu, select MEBX Configuration.
Main Advanced
ACPI Configuration

CPU Configuration

Video Configuration

Audio Configuration

SATA Configuration

USB Configuration

PCI Express Configuration

ME Configuration

Active Management Technology Support

MEBX Configuration

Debug Configuration

UEFI Device Manager

SIO NUVOTON6116D

Console Redirection

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
3. Select MEBX Configuration and press Enter.
Advanced
MEBX Configuration
MEBX Configuration
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
66
Management Engine BIOS
®
InsydeH2O Setup Utility
Security Boot Exit
MEBX Configuration Set-
ting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

InsydeH2O Setup Utility
MEBX Configuration Set-
ting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
Rev. 5.0
Rev. 5.0
www.dfi.com