DFI KD632-Q170 User Manual page 39

InsydeH2O Setup Utility
Advanced
Intel I211 <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Intel I211
This field is used to enable or disable the PCI Express Root Port 19 settings.
InsydeH2O Setup Utility
Advanced
Intel I219 <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Intel I219
This field is used to enable or disable the PCI Express Root Port 12 settings.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Control the PCI Express
Root Port.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Rev. 5.0
Control the PCI Express
Root Port.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

ME Configuration
This section configures settings relevant to flash ME region.
Advanced
Me Fw Image Re-Flash <Disabled>
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Me Fw Image Re-Flash
This field is used to enable or disable the flash ME region.
39
InsydeH2O Setup Utility Rev. 5.0
Enable/disable to flash ME
region
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com