DFI KD632-Q170 User Manual page 35

CPU Configuration
This section is used to configure the CPU.
InsydeH2O Setup Utility
Advanced
CPU Configuration
Intel Speed Step <Enabled>
Turbo Mode <Enabled>
CPU C States <Enabled>
Hyper-Threading <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Intel Speed Step
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
Turbo Mode
Enable or disable the turbo mode.
CPU C States
Enable or disable the CPU Power Management.
Hyper-Threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Allows more than two fre-
quency ranges to be sup-
ported.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Video Configuration
This section configures the video settings.
Advanced
Video Configuration
Primary Display
Internal Graphics Device
Boot display
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Primary Display
Set the initial priority.
Internal Graphics Device
Keep IGFX enabled or disabled based on the setup options.
Boot display
Set the display device combination.
Note:
To control "Primary Display" & "Boot display", first go to "Boot" menu and select
different "Boot Type".
Boot Type : Legacy Boot Type -> Hide Primary Display & Show Boot display
Boot Type : UEFI Boot Type -> Show Primary Display & Hide Boot display
Boot Type : Dual Boot Type -> Show Primary Display & Show Boot display
35
InsydeH2O Setup Utility Rev. 5.0
Initial priority:
AUTO: PEG -> PCIe ->
PCI -> IGFX
<Auto>
IGFX: IGFX -> PEG ->
<Auto>
Primary Display
PCIe -> PCI
<VGA+DVI>
PEG: PEG -> PCIe -> PCI
Auto
-> IGFX
IGFX
PCI: PCI -> PCIe -> PEG
PEG
-> IGFX
PCI
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com