Quiet Mode - Woodbridge B0950S Installation And Care Manual

WOODBRIDGE

Quiet mode

To activate/deactivate the Quiet mode, press and hold the "STOP
then press and release"MASSAGE" button (step 2), lastly release the "STOP
(step 3). Make sure you hear a beep sound to confirm the setting is completed or you
will have to restart the same process again.Repeat the process to start buzzer function.
Step 1: Press and Hold
Step 3: Release
User code
The user code needs to be set to avoid disturbance from remote controls when more
than one toilet is use in the house.Turn on the toilet for setting while turn off others.
(1) Press and hold "STOP"button (step 1) and then press and release "REAR" button
(step 2), lastly release " STOP" button (step 3) to enter to user code setting.The
remote control shows only water pressure and spray position level. Characters are
blinking on the screen.
(2) Press water pressure buttons of "+"and "-"to choose user code 1-9.
(3) Press and hold "STOP"button and then press and release "REAR" button again,
lastly release the "STOP" button and remote control will save the setting and exit
user code setting window,the buzzer will ring "click" to indicate successful setting.
The sum of water pressure and position level on LCD is the user code.Restart to
clear the user code and reset
Automatic flush button
Press and hold "STOP" button (step 1)
and then press and release "FLUSH"
button (step 2), lastly release "STOP"
button (step 3) to start or close
automatic flushing function.When
the automatic flushing function is
turned on, toilet will automatically
flush after detecting user sitting for
more than 6 seconds and leaving
the seat for more than 3.5 seconds.
12
R
Set Auto Function
ENERGY
NOZZLE
SAVER CLEANING
STOP
PRESSURE
WATER
TEMPERATURE
WATER DRY SEAT
www.woodbridgebath.com
REMOTE CONTROL ILLUSTRATION
step 2: Press and
MASSAGE
POSITION
DRY SEAT
AUTO
Step 2: Press
then Release
Step 1: Press and Hold
Step 3: Release
button (step 1),
"
button
"
Release