Confirming That The Power Is On - Canon PRO-500 Series Online Manual

Confirming that the Power Is On

The POWER lamp is lit when the printer is turned on.
Even if the LCD is off, if the POWER lamp is lit, the printer is on.
Note
• It may take about 30 seconds to 4 minutes for the printer to start printing immediately after you turn on
the printer.
• The LCD will turn off if the printer is not operated for about 5 minutes. To restore the display, press any
button except the ON button on the operation panel or perform the print operation. You cannot change
the wait time before the LCD turns off.
179