Canon PRO-500 Series Online Manual page 147

Note
• Depending on the setting, the choices below may not be displayed.
Print with the loaded paper.
Select if you want to print on the paper loaded in the rear tray without changing the paper settings.
For example, when the paper setting for printing is A5 and the rear tray paper information registered
to the printer is A4, the printer starts printing with A5 on the paper loaded in the rear tray.
Replace the paper and print
Select if you want to print after replacing the paper of the rear tray.
For example, when the paper setting for printing is A5 and the rear tray paper information registered
to the printer is A4, you load A5 sized paper in the rear tray before you start printing.
The rear tray paper information registration screen is displayed after replacing the paper. Register
the rear tray paper information according to the paper you loaded on the rear tray.
Note
• If you do not know what paper information to register to the printer, press the Back button when the
screen to select the operation is displayed. When the previous screen is displayed, check the paper
size and the media type and register them to the printer.
• For more on the proper combination of paper settings you can specify by the printer driver or on the
LCD:
• For Windows:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
• For Mac OS:
Paper Settings on the Printer Driver and the Printer (Media Type)
Paper Settings on the Printer Driver and the Printer (Paper Size)
Cancel
Cancels printing.
Select when you change the paper settings specified for printing. Change the paper settings and try
printing again.
Default Setting for Displaying the Message which Prevents Misprinting
• When you print using the operation panel of the printer:
The message which prevents misprinting is enabled by default.
To change the display setting when you print using the operation panel of the printer:
Paper-related settings
• When you print using the printer driver:
The message which prevents misprinting is disabled by default.
To change the display setting when you print using the printer driver:
◦ For Windows:
Changing the Printer Operation Mode
147