Table of Contents
Advertisement
VBA-4E3A-G20-ZEL/M1L-P2
Safety
3
Safety
3.1
Symbols Relevant to Safety
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
3.2
Intended Use
The AS-Interface motor control module is used to control one or two DC roller Interroll EC310
motors or compatible types. The motor control module has two inputs for connecting three-wire
sensors.
Read through these instructions thoroughly. Familiarize yourself with the device before
installing, mounting, or operating.
Always operate the device as described in these instructions to ensure that the device and
connected systems function correctly. The protection of operating personnel and plant is only
guaranteed if the device is operated in accordance with its intended use.
3.3
General Safety Information
Make sure that the flat cables engage completely in the flat cable guide, to ensure a complete
seal and secure contact.
During operation, make sure that connectors are not disconnected or inserted, and the flat
cable guide is not opened. This could inadvertently start motors.
Only instructed specialist staff may operate the device in accordance with the operating
manual.
User modification and or repair are dangerous and will void the warranty and exclude the
manufacturer from any liability. If serious faults occur, stop using the device. Secure the device
against inadvertent operation. In the event of repairs, return the device to your local
Pepperl+Fuchs representative or sales office.
The connection of the device and maintenance work when live may only be carried out by a
qualified electrical specialist.
The operating company bears responsibility for observing locally applicable safety regulations.
Store the not used device in the original packaging. This offers the device optimal protection
against impact and moisture.
Ensure that the ambient conditions comply with regulations.
Note!
Disposal
Electronic waste is hazardous waste. When disposing of the equipment, observe the current
statutory requirements in the respective country of use, as well as local regulations.
6
Advertisement
Table of Contents
