Support Information - Motorola MVME297-002 User Manual

General Information
1
MVME712 series transition modules (MVME712-12, MVME712-13,
MVME712A, MVME712AM, MVME712B, or MVME712M); P2 or LCP2
Adapter Boards
Operating system
The MVME197Bug debug monitor firmware (197Bug) is provided in the Flash
memory on the MVME197 module. It provides over 50 debug, up/down line
load, and disk bootstrap load commands, as well as a set of onboard
diagnostics and a one-line assembler/disassembler. 197Bug includes a user
interface which accepts commands from the system console terminal. 197Bug
can also operate in a System Mode, which includes choices from a service
menu. Refer to the MVME197BUG 197Bug Debugging Package User's Manual for
more details.
The MVME712 series transition modules provide an interface between the
MVME197 module and peripheral devices. They connect the MVME197 to
EIA-232-D serial devices, Centronics-compatible parallel devices, SCSI
devices, and Ethernet devices. A P2 Adapter Board or LCP2 Adapter Board
and cable is required with the MVME712 series transition modules. Refer to
the MVME712-12, MVME712-13, MVME712A, MVME712AM, and
MVME712B Transition Modules and LCP2 Adapter Board User's Manual or the
MVME712M Transition Module and P2 Adapter Board User's Manual for more
details.
Software available for the MVME197 includes SYSTEM V/88 and real-time
operating systems, programming languages, and other tools and applications.
Contact your local Motorola sales office for more details.

Support Information

Detailed support information such as connector signal descriptions, the
module parts list, and the schematic diagram for the MVME197DP/SP is
contained in the SIMVME197 Single Board Computer Support Information
manual.
This manual may be obtained free of charge by contacting your local Motorola
sales office.
1-6 User's Manual