General; Contact; Installation Information And Operating Manual; Additional Valid Documents - Beko CLEARPOINT S040 Installation & Operation Instructions

CLEARPOINT ® Water separator

1. General

1.1 Contact

Manufacturer
BEKO TECHNOLOGIES GmbH
Im Taubental 7 | D-41468 Neuss
Tel. + 49 2131 988 - 1000
info@beko-technologies.com
www.beko-technologies.com

1.2 Installation information and operating manual

INFORMATION Copyright protection
The content of this installation and operating manual, in the form of text, images, photos,
i
drawings, diagrams, and other illustrations, is copyright protected by the manufacturer. This
applies in particular to copies, translations, microfilm versions, and saving and processing this
document in electronic systems.
Publication date
10/31/18
This installation and operating manual, referred to in the following as the manual, must be legible and must be stored
near the product at all times.
The manual must be included if the product is sold or handed over to another party.
NOTE Observe the manual!
This manual contains all basic information required to safely operate the product, and operators
must read the manual before carrying out all work. Otherwise hazards could occur for personnel
or materials, and functional or operating disruptions could occur.

1.3 Additional valid documents

This manual describes all steps required to install and operate the CLEARPOINT
Further information on installing and operating accessories is provided in the following installation and operating
manuals:
• BEKOMAT 20
®
• BEKOMAT 20 Vario
®
4 | 56
Revision version
00_01
Installation and operation instructions
Service and tools
BEKO TECHNOLOGIES GmbH
Im Taubental 7 | D-41468 Neuss
Tel. + 49 2131 988 - 1000
service-eu@beko-technologies.com
www.beko-technologies.com
Reason for change
Change to standards and
directives
water separator.
®
Scope of change
Initial creation