Installation; Warning - Beko CLEARPOINT S040 Installation & Operation Instructions

CLEARPOINT ® Water separator

7. Installation

7.1 Warning

DANGER Use of incorrect replacement parts, accessories or installation materials!
The use of incorrect replacement parts, accessories or installation material or operating and
auxiliary materials may result in death or severe injuries. This may also cause functional or
operating disruptions or material damage.
•
•
•
DANGER Pressurized system!
The risk of death or severe injuries exists in case of contact with fast or sudden exiting
compressed air or due to bursting system parts.
•
•
•
•
•
•
•
•
•
•
•
WARNING Insufficient qualification!
If personnel have insufficient qualifications, this may result in accidents, personal injury and
property damage as well as operating disruptions while working on the product.
All work on the product may only be carried out by sufficiently qualified professional technicians.
CAUTION Improper installation!
Improper installation of the product may result in personal injury, material damage, and
operating disruptions.
•
•
26 | 56
Only use undamaged original parts, auxiliary and operating materials for all installation and
maintenance work as indicated by the manufacturer.
Only use fittings and connection elements permitted for the specific application and suitable
tools in proper condition.
Only use pipelines free from dirt, damage and corrosion.
Only work on the system when it is depressurized and secure the system against unintended
restart.
Set up a safety zone around the system when carrying out any assembly, installation,
maintenance and repair work.
Before pressurizing the system, check and tighten all pipe connections.
Pressurize the system slowly.
Avoid pressure surges and high pressure differentials.
Install all pipelines without mechanical tension. Avoid vibrations occurring in the pipeline
network by using vibration dampers.
Pipelines must be able to support the additional weight of the separator. Additional
attachments should be mounted if necessary.
Carefully observe the installation and operating instructions in this manual.
Carefully observe inspection and maintenance intervals.
Permanently install inlet and outlet lines.
Do not make modifications on the product.
The direction of flow for the separator must conform to the direction of flow in the pipeline.
The separator must be mounted vertically in the pipeline.
Installation and operation instructions