Foreseeable Misuse; Warranty And Liability - Beko CLEARPOINT S040 Installation & Operation Instructions

CLEARPOINT ® Water separator

1.6 Foreseeable misuse

If the separator or accessories are used in a manner other than as described in the "Proper use" chapter, this is
considered foreseeable misuse. Foreseeable misuse includes using the product in a manner not intended by the
manufacturer or suppliers, but which may occur due to foreseeable human behavior.
Foreseeable misuse includes:
• Completing modifications of all kinds, in particular changing the design or process technology, since this may result
in personal injury and property damage as well as functional and operating disruptions.
• Disabling or failing to use available or recommended safety equipment.
• Using compressed gases for preparation that are not included in fluid group 2 in accordance with DGRL 2014/68/EU
or contain aggressive components. In case of doubt, complete a gas / condensate analysis.
This list does not claim to be exhaustive, since it is not possible to indicate all possible misuses in advance. If the
operator knows of misuses of the separator or accessories that are not listed here, the manufacturer must be informed
of these promptly.

1.7 Warranty and liability

The operator and user must take the proper use into consideration. The operator shall be solely responsible for any
action not described here and any use going beyond that described as proper use.
All warranty shall be voided, if the separator is used improperly, for a purpose other than the intended or is operated
outside the limits specified in the technical data. In such cases, the manufacturer shall also reject any liability for
damages.
Improper operation includes:
• Technically inappropriate installation, commissioning, maintenance or operation
• Use of defective components
• Failure to observe the safety-relevant information, usage steps and instructions included in this manual
• C ompleting modifications of any kind, in particular design or process technology changes to the product
• Use of third-party spare parts or accessories that have not been approved by the manufacturer in completing
maintenance and repair work
• Failure to observe maintenance and inspection intervals
8 | 56
Installation and operation instructions