Exchange The Water Separator Insert - Beko CLEARPOINT S040 Installation & Operation Instructions

CLEARPOINT ® Water separator

9.5 Exchange the water separator insert

The following requirements must be fulfilled to exchange the water separator insert and preparatory work must be
completed.
Tool
• Screwdriver - Philip's head size 2.5
mm
1. Open any bypass lines
1.
36 | 56
• new WS insert
Preparatory work
Picture
Preconditions
Material
Description
1.
1. Close the shut-off valves upstream and downstream
of the separator or relevant system section and
depressurize separator
2. If using the BEKOMAT
bottom section of the housing.
For further information, see the attached installation and
operating instructions for the BEKOMAT
Installation and operation instructions
Protective equipment
• Protective gloves (liquid-
resistant)
• Safety glasses with side
protection (goggles)
• Hearing protection
• Class FFP 3 respirator
• Safety shoes
, it must be separated from the
®
®