Table of Contents
Advertisement
3
Remove the adaptor after the selected mode is
completed.
Clean the shaver with water or with the
cleaning brush once per month.
(See pages 40 and 42.)
The main unit neck section (a), inner
blade attachment part (b), trimmer,
system outer foil gaps, etc. cannot be
cleaned with the self‑cleaning recharger.
Changing the mode of self‑cleaning recharger
The "Charge" mode starts when attaching the shaver,
and the mode can be changed by pressing the
SELECT button.
Charge mode
AUTO mode
(Charge)
(Clean/Dry/Charge)
Notes
• Do not press the cleaning liquid unit removal button
during cleaning as the cleaning liquid may spill
causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under
extreme low temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.
40
ES-LV9A_CH.indb
40
Cleaning thoroughly
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil.
2
Press
2 seconds to activate the sonic
vibration cleaning mode.
• Splashing of foam is suppressed.
• The battery capacity lamps blink
Dry/Charge mode
in order.
(Dry/Charge)
• After about 20 seconds, it will be
automatically turned off, or you can turn it off by
pressing the power switch.
3
Remove the outer foil section
and clean with running water.
• See page 42 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the shaver in
sonic vibration cleaning mode.
• After rinsing with water, shake the shaver up and
down for a few times to remove excess moisture and
then wipe off any drops of water with a dry cloth.
for more than
2016/03/11
9:54:03
Advertisement
Chapters
Table of Contents
