Replacing The System Outer Foil; And The Inner Blades - Panasonic ES-LV9A Operating Instructions Manual

Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
►Cleaning with the long brush
Clean the outer foil section,
system outer foil, the shaver
body and the trimmer using
the long brush.
►Cleaning with the short brush
• Clean the inner blades using the
short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the
blades as it will damage the inner
blades and affect their sharpness.
Replacing the system outer foil and
the inner blades
appears on the lamp display once a year. (Based on
one 3‑minute shave use per day)
We recommend checking the system outer foil and the
inner blades when it appears.
Press the power switch for more than 30 seconds to
turn off .
Even if is not turned off right after the replacement, it
will automatically turn off within approximately 7 uses.
system outer foil once every year
inner blades once every two years
42
ES-LV9A_CH.indb 42
►Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
to the shaver until it clicks.

►Replacing the system outer foil

1. Press the system outer foil release
buttons and pull down the system
outer foil.
2. Align the foil frame mark (
system outer foil mark ( ) and
securely attach together until it clicks.
• Do not press the system outer foil release buttons
with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
) to the
) and the
2016/03/11 9:54:04