Cleaning Thoroughly - Panasonic ES‑LV9Q Operating Instructions Manual

3
Remove the adaptor after the selected mode is
completed�
Clean the shaver with water or with the
cleaning brush once per month. (See
pages 18 and 20.)
The main unit neck section (a), inner blade
attachment part (b), trimmer, system outer foil
gaps, etc. cannot be cleaned with the self‑
cleaning recharger.
Changing the mode of self-cleaning recharger
The "Charge" mode starts when attaching the shaver, and the
mode can be changed by pressing the SELECT button.
AUTO mode
Charge mode
(Charge)
Notes
• Do not press the cleaning liquid unit removal button during
cleaning as the cleaning liquid may spill causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under extreme
low temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.
18
ES-LV9Q_EU.indb 18

Dry/Charge
mode
(Clean/Dry/
Charge) (Dry/Charge)

Cleaning thoroughly

Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some

water to the system outer foil [A2]�
2
Press for more than
2 seconds to activate the sonic
vibration cleaning mode�
• Splashing of foam is suppressed.
• The battery capacity lamps blink in order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power switch.
3
Remove the outer foil section
[A9] and clean with running
water�
• See page 20 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
• After rinsing with water, shake the shaver up and down
for a few times to remove excess moisture and then wipe
off any drops of water with a dry cloth.
2017/12/22 9:13:17