Cleaning Thoroughly - Panasonic ES-LV9C Operating Instructions Manual

• It is not possible to change the mode after the "AUTO" mode
has started.
Clean
10 min
* When the ambient temperature of the self‑cleaning recharger
is low (approx. 15 °C or lower): 170 min
3
Remove the adaptor after the selected mode is
completed�
Clean the shaver with water or with the cleaning
brush once per month. (See pages 14 and 16.)
The main unit neck section (a), inner blade
attachment part (b), trimmer, system outer foil
gaps, etc. cannot be cleaned with the self‑
cleaning recharger.
Changing the mode of self-cleaning recharger
The "Charge" mode starts when attaching the shaver, and the
mode can be changed by pressing the SELECT button.
Charge mode AUTO mode
(Charge) (Clean/Dry/Charge)
Notes
• Do not press the cleaning liquid unit removal button during
cleaning as the cleaning liquid may spill causing a malfunction.
14
ES-LV9C_ASIA.indb 14
Dry Charge
80 min* 0 to 60 min


Dry/Charge mode
(Dry/Charge)
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under extreme low
temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so smooth
shave is maintained without applying oil.

Cleaning thoroughly

Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil�
2
Press for more than
2 seconds to activate the sonic
vibration cleaning mode�
• Splashing of foam is suppressed.
• The battery capacity lamps blink in order.
• After about 20 seconds, it will be
automatically turned off, or you can turn
it off by pressing the power switch.
3
Remove the outer foil section
and clean with running water�
• See page 16 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the
shaver in sonic vibration cleaning mode.
2017/09/08 15:21:58